Join the 155,000+ IMP followers

www.usa-automation.net
Keysight technologies News

KEYSIGHT AND NOKIA BELL LABS TO DEMONSTRATE 6G SUBTERAHERTZ COMPONENT CHARACTERIZATION AT IMS 2023

The vector component analyzer demonstration measures the error vector magnitude of a Nokia power amplifier designed for use in 6G D-band wireless communications systems.

KEYSIGHT AND NOKIA BELL LABS TO DEMONSTRATE 6G SUBTERAHERTZ COMPONENT CHARACTERIZATION AT IMS 2023

Keysight Technologies, Inc. and Nokia Bell Labs are demonstrating component and radio frequency integrated circuit (RFIC) characterization for 6G subterahertz (sub-THz) radio frequency (RF) applications in the D- and E-bands at the International Microwave Symposium 2023 (IMS 2023) in June.

Delivering the extreme data speeds, ultra-low latency, and near-infinite bandwidth of 6G will require the use of a sub-THz spectrum. However, sub-THz frequencies have not traditionally been used for cellular communications due to their propagation characteristics, which present signal integrity and path loss challenges that can negatively impact performance. To help mitigate these challenges, Keysight and Nokia Bell Labs have been collaborating to develop characterization techniques to test active sub-THz components, such as amplifiers, mixers, and frequency converters, to ensure they do not introduce additional signal distortion into communications systems.

The collaboration's most recent achievement will be presented at Keysight's booth #835 at IMS 2023. Built on the Keysight PNA-X Vector Component Analyzer (VCA) solution, the demonstration characterizes a Nokia power amplifier (PA) developed for use in 6G D-band wireless communications systems and designed to operate with a low error vector magnitude (EVM). Using the Keysight N5290A PNA Millimeter Wave System, Nokia Bell Labs can accurately detect the PA's low EVM, which is a measure of the signal distortion introduced into the communications system by the component. With these measurements, Nokia Bell Labs can better understand the PA's performance to optimize its 6G transmission system design.

Keysight and Nokia Bell Labs are also partnering to showcase an E-band test solution at IMS 2023. The demonstration features the Keysight N9042B UXA Signal Analyzer used in combination with the V3050A Signal Analyzer Frequency Extender to measure a Nokia transceiver RFIC designed for use in an E-band system for backhaul applications.

To help network equipment manufacturers, semiconductor companies, and device makers address the bandwidth and performance demands of 6G, Keysight offers a 6G Sub-THz R&D Testbed. The wideband sub-THZ testbed features an arbitrary waveform generator (AWG) that generates a wideband intermediate frequency (IF), which is upconverted to H-band (220-330 GHz). The signal is downconverted to an IF, digitized with a UXR high-performance oscilloscope, and then demodulated and analyzed using PathWave Vector Signal Analysis (VSA) software.

The Keysight and Nokia Bell Labs 6G D-band PA characterization demonstration will also be presented at the Radio Frequency Integrated Circuits Symposium 2023, which is co-located with IMS 2023.
 
www.keysight.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers